| Are you a fan of wild and exotic animals? Then | | | | the plants inside which will serve as an anchor for |
| try to invest in a more convenient way of | | | | the substrate. |
| collecting them - start setting up your saltwater | | | | 5. Fill the tank with a bucket-full of dechlorinated |
| aquarium. Before troubling yourself to the | | | | water. Add salt by using a device that is used to |
| different kinds of fish to collect, you must first | | | | read the amount of salt that is dissolved inside |
| know how to begin setting up your saltwater | | | | the water which is known as a hydrometer. You |
| aquarium. You absolutely must take the time to | | | | should have a specific gravity value of at least |
| do it correctly if you want long term success with | | | | 1.020 to 1.023 to make the water amiable for its |
| your new tank. | | | | inhabitants. |
| Let's talk about a few of the basic steps. | | | | 6. You can start filling your tank with saltwater |
| 1. Before you start setting up your saltwater | | | | and leave about an inch before it reaches the |
| aquarium, check your tank for any kind of leak. | | | | mouth of the tank. |
| Leaks can become a big problem when you have | | | | 7. Start the filtering system. |
| put everything in your tank just to find out that | | | | 8. Add the thermometer and the heater. |
| you have to remove everything and fix the rift. | | | | Remember when setting up your saltwater |
| You have to thoroughly inspect your tank | | | | aquarium that the majority of marine life |
| particularly before purchasing it and then again | | | | appreciates a temperature of about 75 to 80 |
| before filling it with water. | | | | degrees Fahrenheit. It is not advisable that you go |
| 2. Clean your aquarium with a solution made of | | | | above or below the implied temperature although |
| one teaspoon of pure bleach meant for every | | | | in some instances, these specifics can change due |
| five gallons of water. Scrub the outer and inner | | | | to other marine life requirement. |
| surface of the tank including everything that will | | | | 9. You have to let things run for about 72 hours |
| come in contact with it; namely rocks, plastic | | | | in order to achieve the desired setting of the |
| plants and reefs, decorations, etc. Rinse | | | | temperature and the right moving water. Start |
| thoroughly numerous times with clean water. | | | | cycling the saltwater aquarium in order to maintain |
| 3. Install the tanks filtration system. To do this, | | | | a steady and acceptable biological life. As an |
| you have to follow the instructions of the | | | | important consideration when setting up your |
| manufacturer since every model varies in the | | | | saltwater aquarium, be sure that the levels of |
| installation process. Follow the instructions carefully | | | | chemical compounds are of the right amount. |
| based on the kit. | | | | Once it is good to go, you are good to add your |
| 4. Before you put the substrate inside the tank, | | | | new fish. Then sit down and enjoy the beautiful |
| wash it thoroughly. After which, you can now put | | | | sites. |