HC Qiao Procurement: How to choose domestic solar water heater? - Solar energy, electromagnetic valve - heat pump industry

Currently, the market Sell Home Solar watergeneral standard is appropriate. In addition, the
heaters Variety, in accordance with the Solarnominal water capacity of many products is by
Energy To distinguish between types of collectorscalculating the capacity of each tube and the
can be divided into vacuum tube and a plate; inwater container capacity calculated from the sum,
accordance with the structural distinction can bebut in fact the following water heater and vacuum
divided into integrated and split; in accordance withtube outlet water is not released for use, the
the distinction between production process can beuser truly The water is only used to the inlet and
divided into pressurized and non-pressurized.the overflow of water between the mouth, so in
Currently, the market for solar home Waterchoosing vendors should be asked clearly, their
heater The most common type of householdnominal water capacity refers to the capacity of
most non-pressure vacuum tube solar waterall the water is actually available water capacity,
heaters. We buy home solar water heater shouldthe difference between the two.
note the following:7. If you buy enough of household solar water
1. Thermal performance indicators, "the averageheater need to configure the electric heating
daily efficiency," the higher the better, "thedevice should be selected with Electric Product
average heat loss coefficient" lower the better.safety design.
2. A key component of domestic solar water8. The purchase of other related accessories,
heater is the all-glass vacuum tube solar collectorssuch as automatic water feeding device,
(the vacuum), vacuum tube quality directlytemperature and water level indicator, Solenoid
affects the performance of domestic solar watervalve And so the choice for these devices should
heaters. Purchase within the glass tube should bebe careful, some features seem advanced, but
closely observed on the coating, which is calledtoo many component parts, reliability is not high,
solar selective absorbing coating layer coating, asover time, it is easy to go wrong, a choice sure
the manufacturers of different manufacturingto ask life and warranty.
process, coating color will be different, but usually9. Buy a home well after the solar water heaters,
black, deep blue or dark gray color uniformthe installation process should pay attention to
coating of good quality, Membrane Layer nowhether the installation bracket firm, all bolts and
scratches, no peeling or shedding phenomenon,fittings are tightened, the upper and lower pipe
the glass section and no stones or tumorsinstallation location is reasonable, water heater
phenomenon, supporting the supporting pieces ofitself has reinforced measures, etc. . In addition,
glass placed in correct, not loose.Sheung Shui pipe must be installed only back into
3. Buy vacuum tubes should also pay attention tothe unit to prevent water reflux, flow backward
spacing between the pipes, the general twointo the cold water pipe.
around the center distance is appropriate in10. Domestic solar water heaters after-sales
70mm.service is also very important. Select the best
4. Stent design for domestic solar water heatersknown brands of products and good after-sales
should be reasonable and should have sufficientservice dealers. Because domestic solar water
strength and rigidity to ensure an adequateheaters are durable consumer goods, and usually
load-bearing capacity. Daily wind in some largeinstalled in the roof, once a fault, the user is
regions, especially coastal areas, in the purchasedifficult to themselves, so after-sales service
of household solar water heater should also notemust be protected. Currently, the market
that the product is designed to have windmachine free warranty period is generally 3 to 5
resistance.years.
5. Currently on the market, domestic solar water11. As domestic solar water heater is installed
heater reflectors variety of forms, with flatoutdoors, prolonged use, the vacuum tube will be
reflectors, curved reflectors, embossed aluminum,contaminated dust or impurities, resulting in lower
etc., in the purchase of the reflectors should payheat-absorbing efficiency. Therefore, the vacuum
attention to product design can fully use of thetube on the water heater should be cleaned
vacuum tube absorber, the greatest degree ofregularly, especially in the winter snowy regions,
vacuum can be light.snow is more need for timely clean up after.
6. In the purchase consideration should be givenAffected by the housing design as their own can
permanent home in the population, to determinenot be cleaned, should ask dealers, after-sales
the capacity to buy water for household solarservice is included in a regular cleaning.
water heater size. 40 liters of water per person a